Furniture Kit Link Chain Packing Machine
Description
WE-LS8 Furniture Kit Link Chain Packing Machine
The machine fully automatically counts different hardware parts and makes a chain bag, the printer will print the different content on each bag. so when your customer received one set of furniture then just use the link chain bag to install it. You can print the characters, barcode, or Logo according to your design.
Parameter
Speed | 10-60bag/min |
Counting range |
0~100000个 |
Pouch size |
(L)40-160、(W)30-110mm |
Film width |
220mm |
Film thickness |
0.03~0.10mm |
Gas consumption |
≥0.03㎡ / min |
Pressure |
0.5-0.7Mpa |
Sealing type |
Pillow sealing、side sealing with Europe hole or chain bag |
Power |
2000W |
Net/gross wt |
300kg/400kg |
Voltage |
220V、380V/50hz/60hz |
Pack material |
OPP/CPP、OPP/PE MST/PE PET/PE |
Dimension |
L1200×W1000×H1600mm |
Sample
Video
Features
1. According to screw/special parts sample tailored to the vibration plates with a precise count control device, to ensure that every bag is accurate and correct.
2. Adopting a pneumatic structure, the whole machine is more secure, stable, and reliable.
3. Advanced PLC control system and various automatic alarm protection functions, convenient for daily maintenance and reduced wastage.
4. It completes the whole procedure of metering, filling, bagging, date printing, charging(exhausting), and counting automatically.
5. Unique design of the packing seal technology, make the sealing nice and strong.
6. Equipped with a chain conveyor trailer, it can be fed by manual if the vibration plates are unworkable.
Furniture Kit Packing Machine
Machine in customer facturer
Hardware Counting Machine
Screw Packing Machine
Dowels Packing Machine
Cap Packing Machine
Plug Packing Machine
Conner Packing Machine
Dowels Packing Machine
Screw Packing Machine Manufacturer
Nails Packing Machine
Operator interface
Nail Packing Machine
Engineer Team:
Process :
Customer :
Manufacturer
Shipping
Installation Service
1. we provide videos and an instruction manual to show the process of installation.
2. we provide training for installation for free in our factory.
3. we can send a technician to the buyer’s factory to install the machine and provide a training course.
After Sales Service
1. One-year warranty and free lifetime technique support.
2. Free spare parts would be supplied if the machine broke within the warranty period.
3. After the warranty period, the spare parts for replacement are offered based on a certain charge.
Working principle and structure
Bowl hopper is through AC electromagnet of pulsed electro-magnetic-driven flexible structure, form a directional vibration, enabling auto-arrange and direct supply of the workpiece.On the electrical control with TRIAC variable voltage or frequency modulation, step-less speed regulation.
Product Description
The piezoelectric vibration feeder is a kind of vibration feeder the driving source was made by the piezoelectric elements whose main components are the piezoelectric ceramic made of titanate and zirconate. It is the use of the piezoelectric element of the applied voltage to produce mechanical deformation of the piezo effect to achieve the vibration and become the landmark feeder of the parts conveyor.
This vibration plate is widely used and can install on all kinds of vibration plates by center fixed or fixed around. Because the driving parts do not have the coil and iron core, the electrical and mechanical structure is very simple, and has good durability.
Feature
1.No need to adjust the spring sheets
Because through sample controller frequency setting will be able to achieve the desired operational state, so when the machine assembly or the electric frequency 50/60 Hz changes, you don’t need to adjust the resonant spring sheets, and there is no secular variation.
2.No electromagnetic influence on parts
Drive parts do not have any magnetic effect on small parts and magnetic parts, are conducive to the selection of the parts.
3. Most suitable for conveying small parts.
Because it is directly driven by spring sheets, so the effective vibration is very big, so that they can achieve the jump-free conveying of the tiny parts.
4. Significant energy saving effect
Because the piezoelectric element of the electric-mechanical energy conversion rate is high, So it can reach more than 70% of the energy-saving effect compared with the past forms.
5. Shared the 100V and 200V.
By using a dedicated controller, realized the shared of 100V, and 200V.
And can provide stable power by using the the「KS-3」sensor.
Dimension figure of the vibration plate
Technical parameter
Type |
90A |
120A |
150A |
190A |
230A |
300A |
390 |
460B |
||||||||
Input voltage AC(V) |
0~250 |
|||||||||||||||
Current consumption(mA) |
8 |
15 |
37 |
65 |
90 |
165 |
||||||||||
Resonance frequency(Hz+/10Hz) |
255 |
240 |
233 |
210 |
165 |
152 |
120 |
100 |
||||||||
The angle of spring sheets(standard) (θ°) |
15 |
|||||||||||||||
Piezoelectric element model |
SR-1639B |
SR-2443B |
SR-3860B |
SR-5086A1 |
SR-65100A1 |
SR-68105C |
SR-80116A |
|||||||||
Piece number of the used piezoelectric element (pcs) |
2 |
3 |
||||||||||||||
Spraying color |
cover |
S3-309 |
||||||||||||||
foundation |
S2-1034 |
|||||||||||||||
Weight (Kg) |
1.7 |
3.3 |
5.3 |
12.3 |
17.8 |
32.6 |
54 |
105 |
||||||||
Maximum support vibration plates |
diameter φ(mm) |
120 |
150 |
250 |
310 |
370 |
500 |
620 |
760 |
|||||||
weight(kg) |
0.3 |
0.6 |
2 |
3 |
5 |
8 |
14 |
25 |
||||||||
The weight of the workpiece can support (kg) |
0.2 |
0.4 |
0.8 |
1.5 |
2.5 |
3 |
5 |
|||||||||
Operating temperature (℃) |
0~40 |
|||||||||||||||
Operating humidity(%/RH) |
10~90 |
|||||||||||||||
Application controller |
standard |
P1 series |
P2 series |
P3 series |
||||||||||||
Feedback control |
P1-F series |
P2-F series |
P3-F series |
Main technical parameters
1. Rated voltage of 220 V or 110 V AC, frequency 50 Hz or 60 Hz, the vibration plate uses the half wave excitation or full wave excitation according to the need
2. Vibration specification: terminal disk diameter from φ80 to φ1000mm.
3. Vibration plate is divided clockwise and counterclockwise according to the direction of the material.
Installation, use, and maintenance
1. When opening the package, you need to check whether the whole machine and accessories match.
2. Please check the connections of the host, and make sure that they all fasten stable.
3. When installing it that the Damping parts must correspond to the components in the upper and lower holes.
4. After good height and level adjustments, please fasten the vibration plate on the mounting plate.
5. Leave the gaps for the parts connections, so as not to affect the using functions of the vibration.
6. Electrical plugs for the vibration plate are mounted on the electrical control box (Note: electric control box must be oil and waterproof ), connected to a 220V or 110V power supply, open the switch, turn the potentiometer slowly, and gradually achieve the required feed number. Note: Before connecting power, make sure to adjust the potentiometer to the minimum, so as not to damage the Silicon controlled rectifier. The electromagnet and armature of clearances and elastic parts are been adjusted before leaving the factory, so you don’t need to adjust it usually.
7. The vibration plate running for more than two years, and the chassis parts should be disassembled and cleaned up of the dust and dirt on the various parts, and then reinstall it, this is for it to get a good performance.
Common malfunctions and their elimination methods
1. If the power is on but the vibration does not work, please check the electric controller fuse, is it broken? And is it got poor contact between the plug and socket in the electrical component, tie them up.
2. Low speed
(1) Check the screw of the base fasten of the vibration plate.
(2) Please check the space between the electromagnet and the gag bit, it supposes at 0.5-1.2mm, and the core of the electromagnet should be at a parallel level, and their Not parallel degree should not be greater than 0.02 (mm).
(3) check whether the spring was broken or not.
3. The winding of the electromagnet was burned up or maybe the temperature rise too high.
(1)The space between the electromagnet and the gag bit should not too big because it will be burned, also the speed of the plate should not be more than 200, it will make the coil burn, you can increase or decrease the spring to adjust the vibration.
(2) Suitable for the full-wave electromagnet, if used with half-wave power, the temperature will increase.
Piezoelectric series
This series has a variety of models from a total weight of 0.25kg for small machines, to a total weight of 17 kg, invited to orbit a maximum weight of 5 kg, and large vibration machines up to 700 mm.
The biggest feature is adjusting the frequency through the controller, their fore you don’t need to adjust the spring sheets.
Have a 「Direct connection type」「spring sheets connection type」「rubber foot type」three different vibration machines, you can choose the machine according to your needs.