Automatic Shrink Wrap Machines L Bar Sealers

Automatic L Sealer Shrink Wrap Machines are widely used in the assembly line of mass production and packaging. It uses an electronic eye to detect products when they pass through the conveyor. After a product passes the sealing arm, the seals fully enclose the product in shrink film. After the seal, products continue to pass into the shrink tunnel. The shrink tunnel has recirculating heat to shrink the film to the product evenly. Fully wrapped products exit the tunnel, and the film is conformed tightly to the product.

Description

Automatic Shrink Wrap Machines L Bar Sealers

Recommended Models Information:

WE-400LA + WE-450C

Automatic Shrink Wrap Machines|L Bar Sealers

Model WE-400LA
Sealing type L-sealing (L-bar)
Power supply 380V/50-60Hz/3Phase
Speed 15-35 packs per minute(depends on product size)
Product size width+height≤400mm  length+height≤480mm
Filling volume Sealing height≤125 mm  Packing width≤350mm
Film center-folded polyolefin(POF )film
Max film size 530mm(width)x280mm(outer diameter)
Power 1.5KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 300kg
Working height 780-850mm
Sealing system Special durable alloyed sealing knife with anti-stick Teflon coats
Machine material Carbon steel
WE-450C
Power supply 380V/50-60Hz/3phase
Oven size 1200mm(L),entrance 400(W)*220(H)mm
Conveyor Conveyor chains with rotating silicon coated rods, speed variable
Power 7KW
Working height 780-850mm
Gross Weight 160kg
Machine material Carbon steel

WE-400LB + WE-450CAutomatic Shrink Wrap Machines|L Bar Sealers

Model WE-400LB
Sealing type L-sealing (L-bar)
Power supply 380V/50-60Hz/3phase
Speed 15-35 packs per minute(depends on product size)
Product size width+height≤400mm  length+height≤480mm
Filling volume Sealing height≤125 mm  Packing width≤350mm
Film center-folded polyolefin(POF )film
Max film size 530mm(width)x280mm(outer diameter)
Power 1.5KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 350kg
Working height 780-850mm
Sealing system Special durable alloyed sealing knife with anti-stick Teflon coats
Operating panel Siemens touch screen, PLC, Omron temperature controller
Machine material Stainless steel
WE-450C
Power supply 380V/50-60Hz/3phase
Oven size 1200mm(L),entrance 400(W)*220(H)mm
Conveyor Chains with rotating silicon coated rods, speed variable
Power 7KW
Working height 780-850mm
Gross Weight 200kg
Machine material Stainless steel

WE-250A+WE-450CAutomatic Shrink Wrap Machines|L Bar Sealers

Model WE-250A + WE-450C
Sealing type L-sealing (L-bar)
Power supply 380V/50-60Hz/3phase
Speed 15-45 packs per minute(depends on product size)
Product size width+height≤250mm  length+height≤330mm
Filling volume Sealing height≤80 mm  Packing width≤200mm
Film center-folded polyolefin(POF )film
Max film size 380mm(width)x280mm(outer diameter)
Power 6KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 390kg
Working height 780-850mm
Sealing system Special durable alloyed sealing knife with anti-stick Teflon coats
Operating panel Siemens touch screen, PLC, Omron temperature controller
Machine material Carbon steel
Oven size 1200(L)*300(W)*165(H)mm
Conveyor Chains with rotating silicon coated rods, speed variable

Equipment Feature:

1. The sealing knife is made of Teflon coated anti-stick and high-temperature resistant alloyed knife, the sealing will not crack, will not coke, will not emit smoke, and zero pollution.
2. According to different products, it is equipped with photo-eye detection, with one set for horizontal or vertical detection, which is convenient for switching and selection.
3. Automatic feeding, the length can also be adjusted automatically by the combination of the electric eye and the timer. Equipped with an induction motor to automatically handle the waste.
4. Using the original “OMRON” digital temperature controller with a built-in PID function, the temperature of the sealing knife is extremely sensitive and accurate, and can be set at will. The sealing knife itself also has an automatic protection function, which can effectively prevent miscut packaging, and has an automatic alarm function, which greatly improves the safety of the operator.
5. The whole set of machines truly realizes the unmanned operation connected with the production line, and the specially designed upper and lower synchronization mechanism of the film can correct the deviation of the film.
6. It also has a close connection function, which is specially designed for small products. When the size of the package is changed, the adjustment is very simple, and there is no need to change the mold and bag maker.

 Sample picture

Automatic Shrink Wrap Machines|L Bar Sealers

 Machine Details

Automatic Shrink Wrap Machines|L Bar Sealers

Drawings:

WE-400LA + WE-450C  DRAWING

WE-400LB+ WE-450C DRAWING

Automatic Shrink Wrap Machines|L Bar Sealers

WE-250A +WE-450C DRAWING

Video :

 

Installation Service

1. We provide videos and an instruction manual to show the process of installation.

2. We provide training for installation for free in our factory.

3. We can send a technician to the buyer’s factory to install the machine and provide a training course.

After Sales Service

1. One-year warranty and free lifetime technique support.

2. Free spare parts would be supplied if the machine has broken within the warranty period.

3. After the warranty period, the spare parts for replacement are offered based on a certain charge.